Mineral solutions for water & effluent treatment
Sree Sai Mineral Industries supplies washed and spray-dried kaolin clay used as a coagulant aid and flocculation carrier in municipal water treatment and industrial effluent treatment systems.
Our kaolin's fine plate-like particles help bind suspended solids into heavier, faster-settling flocs, supporting clarifiers and settling tanks in delivering consistent turbidity removal, backed by an in-house quality laboratory and a Certificate of Analysis with every batch.
Where our kaolin is used
Municipal Water Treatment
- Drinking Water Clarification
- Turbidity & Suspended Solids Removal
- Sedimentation Tank Support
- Raw Water Pre-Treatment
Industrial Effluent Treatment
- Wastewater Clarification
- Sludge Settling & Dewatering Aid
- Textile & Dye Effluent Treatment
- Common Effluent Treatment Plants (CETP)
Coagulant-Aid Formulations
- Flocculant Carrier Blends
- Polymer-Kaolin Coagulant Systems
- Weighting Agent for Floc Formation
- Custom Treatment Chemical Formulations
The role our kaolin plays in your treatment process
Flocculation Aid
Fine plate-like particles help bind suspended solids into settleable flocs.
Turbidity Reduction
Supports faster, more complete clarification of raw water and effluent.
Cost-Effective Carrier
An economical weighting mineral that improves coagulant efficiency.
Consistent Quality
Batch-to-batch uniformity verified in our in-house QC lab.
Sree Sai AquaFloc Kaolin
Sree Sai AquaFloc is a washed and spray-dried kaolin grade developed for water and effluent treatment applications. Its controlled particle size and consistent mineral composition help form heavier flocs, supporting faster settling and clearer treated water.
Chemical Composition (Typical)
| Parameter | Typical Value |
|---|---|
| Silicon Dioxide (SiO₂) | 45–48% |
| Aluminium Oxide (Al₂O₃) | 36–39% |
| Iron Oxide (Fe₂O₃) | ≤ 0.90% |
| Calcium & Magnesium Oxides | ≤ 0.50% |
| Loss on Ignition (LOI) | 12–14% |
Physical Properties (Typical)
| Property | Typical Value |
|---|---|
| pH (10% Slurry) | 6.0–7.5 |
| Moisture | < 1.5% |
| +325 Mesh Residue | < 1.0% |
| Median Particle Size (D50) | 6–9 µm |
| Bulk Density | 0.35–0.45 g/cc |
Product Advantages
Five grades — from municipal supply to specialty treatment
| Product Grade | Purity (%) | D50 (µm) | Moisture (%) | pH | Primary Application |
|---|---|---|---|---|---|
| SS-WT 100 | 94–96 | 9.0 | < 2.0 | 6.0–7.0 | Municipal Water Treatment |
| SS-WT 200 | 95–97 | 8.0 | < 1.8 | 6.0–7.2 | Industrial Effluent Treatment |
| SS-WT 300 | 96–97 | 7.0 | < 1.5 | 6.2–7.3 | Coagulant-Aid Formulations |
| SS-WT 400 | 96–98 | 6.0 | < 1.2 | 6.3–7.5 | Sludge Dewatering Aid |
| SS-WT 500 | 97–99 | 5.0 | < 1.0 | 6.5–7.5 | High-Purity Process Water |
* Typical values provided for guidance only. Suitability depends on the specific treatment process and applicable regulations; custom grades can be developed on request.
